Counterbore Ruko HSS TiN DIN 373 with straight shank and fixed pilot, quality grade: medium for through holes
Counterbore HSS DIN 373 medium TiN Ruko
CNTBRE-RUKO-102413T-HSS-180G-D18-TIN
Register now and access more than 125,000 products
Used to manufacture countersinks for cheese head screws, hexagon head bolts and nuts.
Ideal for burr and chatter-free countersinking in steel, cast iron, non-ferrous and light metals.
Optimal results at a low cutting speed.
Datasheets(X)
Diameter of tenon (d1) | 11.0 mm |
Shank diameter (d3) | 12.5 mm |
Length (l1) | 100 mm |
Number of cutting edges (Z) | 3 PCS |
Standards | DIN 373 |
Surface | TiN |
Shank style | Cylindrical |
Last viewed
Inner ladder For professional aluminium telescopic ladders
Wire rope On light plastic rolls
Blind bucket rivet, flat head
Brush seal For ABILIT 50-G and ABILIT 120-G interior sliding door fitting
Hexagon nut, inch
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A4-80 stainless steel, plain
Work jacket
EPS profile thumbturn cylinder
FLEXEN® cold rubber Plus S2 continuous coil pipe insulation