Counterbore Ruko HSS plain DIN 373 with straight shank and fixed pilot for thread core holes
Counterbore HSS DIN 373 thred core hole PL Ruko
CNTBRE-RUKO-102419-HSS-180GRD-D15
Register now and access more than 125,000 products
Used to manufacture countersinks for cheese head screws, hexagon head bolts and nuts.
Ideal for burr and chatter-free countersinking in steel, cast iron, non-ferrous and light metals.
Optimal results at a low cutting speed.
Datasheets(X)
Diameter of tenon (d1) | 6.8 mm |
Shank diameter (d3) | 12.5 mm |
Length (l1) | 100 mm |
Number of cutting edges (Z) | 3 PCS |
Standards | DIN 373 |
Surface | Plain |
Shank style | Cylindrical |
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Hook For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Hammer drill bit Max Quadro-L Vario
Clamping pin/clamping sleeve ISO 13337 spring steel plain
Cylindrical pins with female thread, hardened ISO 8735, steel, plain, type A, hardened (with chamfer and taper)
MFD-S multi-purpose drill bit with straight shank
Drill bushing Ruko steel burnished
Hexagon nut, low profile with fine thread ISO 8675, steel 5, plain
Countersunk head screw with recessed head, H ISO 7046-1, steel 4.8, zinc-plated, blue passivated (A2K)