Counterbore Ruko HSS plain DIN 373 with straight shank and fixed pilot for thread core holes
Counterbore HSS DIN 373 thred core hole PL Ruko
CNTBRE-RUKO-102421-HSS-180GRD-D20
Register now and access more than 125,000 products
Used to manufacture countersinks for cheese head screws, hexagon head bolts and nuts.
Ideal for burr and chatter-free countersinking in steel, cast iron, non-ferrous and light metals.
Optimal results at a low cutting speed.
Datasheets(X)
Diameter of tenon (d1) | 10.2 mm |
Shank diameter (d3) | 12.5 mm |
Length (l1) | 100 mm |
Number of cutting edges (Z) | 3 PCS |
Standards | DIN 373 |
Surface | Plain |
Shank style | Cylindrical |
Last viewed
Twist drill bit HSCo DIN 338 type RN bronze point thinning
Diamond cutting disc, long life & speed SD, construction site
Vehicle dry abrasive paper strip RED PERFECT®
Straight reducer fitting ISO 8434-1, stainless steel 1.4571
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
Dynapro Tipmatic full-extension concealed slide 40 kg For handle-free drawer panels
Slotted cheese head DIN 84, steel 4.8, nickel-plated (E2J)
High-visibility jacket
Slotted set screw with truncated cone DIN 551, steel 14H, zinc-plated blue passivated (A2K)
Labelling pocket, self-adhesive With two permanent adhesive strips on the back