Counterbore Ruko HSS with morse taper and fixed pilot, quality grade: fine for through holes
Counterbore HSS fine plain morse taper Ruko
CNTBRE-RUKO-102427-HSS-180GRD-D33
Register now and access more than 125,000 products
Used to manufacture countersinks for cheese head screws, hexagon head bolts and nuts.
Ideal for burr and chatter-free countersinking in steel, cast iron, non-ferrous and light metals.
Optimal results at a low cutting speed.
Datasheets(X)
Diameter of tenon (d1) | 21 mm |
Length (l1) | 190 mm |
Number of cutting edges (Z) | 3 PCS |
Surface | Plain |
Shank style | Morse taper |
Last viewed
Hexagonal bolt with thread up to the head
Manual screw tap, third tap Ruko hand tap HSCo DIN 352 third tap
EPS profile thumbturn cylinder
Abrasive flap disc Klingspor SMT 624 Supra
Twist drill bit HSS DIN 1897 type RN
GRIP marking system
Hard hat uvex pheos B S WR
Ducting clamp DIN3015-2, heavy-duty series, ribbed inner surface, W.TEC series
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
Hexagon nut, inch