Counterbore Ruko HSS with morse taper and fixed pilot, quality grade: fine for through holes
Counterbore HSS fine plain morse taper Ruko
CNTBRERUKO-102422-HSS-180GRD-D18
Register now and access more than 125,000 products
Used to manufacture countersinks for cheese head screws, hexagon head bolts and nuts.
Ideal for burr and chatter-free countersinking in steel, cast iron, non-ferrous and light metals.
Optimal results at a low cutting speed.
Datasheets(X)
Diameter of tenon (d1) | 10.5 mm |
Length (l1) | 150 mm |
Number of cutting edges (Z) | 3 PCS |
Surface | Plain |
Shank style | Morse taper |
Last viewed
Bracket joint
Twist drill bit HSCo DIN 340 type RN OXIDE
Hexalobular screw with flattened half round head and collar DIN 34805-2, TX drive, A2-070 stainless steel
VDE precision screwdriver, flat slotted
Closed-end blind rivet, dome head ISO 15976 dome head steel/steel
Hexagonal bolt with thread up to head for pressure container construction DIN EN ISO 4017, A2 stainless steel
Roofing screw EUROFAST® EDS-SRB
Ducting clamp DIN3015-3, double series, ribbed inner surface, W.TEC series
Metric ratchet combination wrench Flexible ratchet head with POWERDRIV®
Cover cap