Counterbore Ruko subland twist drill "long" HSS DIN 8378 90° for thread core holes
Counterb. HSS DIN 8378 long thread core hole Ruko
CNTBRE-RUKO-102617-90GRD-D9
Register now and access more than 125,000 products
For the rational creation of through holes and screw head countersinks at 90°.
The hole and counterbore are produced in one operation.
Datasheets(X)
Diameter of tenon (d1) | 6.8 mm |
Shank diameter (d3) | 9 mm |
Length (l1) | 125 mm |
Standards | DIN 8378 |
Surface | Plain |
Shank style | Cylindrical |
Last viewed
Handle For cleaning brushes
Spring band clamp DIN 3021, shape A, W.TEC
Hand reamer HSS H7 DIN 206B
Pan head tapping screw, shape C with Z recessed head ISO 7049, A2 stainless steel, shape C (with tip)
Cylindrical pin with female thread, hardened ISO 8735, steel, plain, type A, hardened (with chamfer and taper), tolerance m6
HSCo blue-ring machine tap for blind holes DIN 371/376
HPC Speedcut 4.0 Universal end mill, long, optional, four blades, uneven angle of twist gradient DIN 6527L, HB shank
Special wrench For oil filling and drain plugs
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Connector, pneumatic