Countersink bit HSS 90°
Countersink bit
CNTSNK-CONI-MA-HSS-BIT-3BLDE-90DGR-D16,5
ZEBRA
Register now and access more than 125,000 products
Standardised 1/4 inch hex shank
No slipping in the drill chuck, suitable for bit holders
Fast changes between countersinking/screwing
Sustainable product packaging made from 100 % PCR (recycled plastic from household waste), 100 % recyclable and Cradle to Cradle Certified® in Bronze
Increased service life and cutting performance by using drilling and cutting oil or cutting paste.
Datasheets(X)
Use in electric screwdrivers, drills and hand deburrers for processing conventional steels, non-ferrous metals and plastics
 | |
Spot-facer diameter (d1) | 16.5 mm |
Length (l1) | 40 mm |
| Standard speed values for conical countersinks with 1/4 inch bit mount | ||||
| Material | Non-ferrous metals | Structural steel, sheet steel St 14 - St 37 | Plastics, duroplastics, thermoplastics | Aluminium alloys |
| Cutting speed m/min | 15 | 15 - 20 | 25 | 20 |
| dia. mm | n = rpm | n = rpm | n = rpm | n = rpm |
| 6,3 | 500 - 800 | 800-1200 | 800-1200 | 500 - 800 |
| 8,3 | 400 - 600 | 600-1000 | 600-1000 | 400 - 600 |
| 10,4 | 300 - 500 | 500 - 700 | 500 - 700 | 300 - 500 |
| 12,4 | 250 - 400 | 400 - 600 | 400 - 600 | 250 - 400 |
| 16,5 | 200 - 300 | 300 - 500 | 300 - 500 | 200 - 300 |
| 20,5 | 150 - 250 | 200 - 400 | 200 - 400 | 150 - 250 |
Last viewed
AL 12 long plate pair
Cylinder tapping screw, shape F with slot DIN 7971, steel, zinc-plated, blue passivated (A2K), shape F
Low-cut safety shoe S3
Single-cut tap for W.TEC® INSERT COIL helical inserts - shape D, made of HSS
Ring screw A2 stainless steel, plain
45° elbow, with solder connection and plug-in end EN1254, copper, 5040
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Metric double open-end wrench DIN 3110/ISO 1085
Wire cable terminal With fork
Oiler/Mist lubricator