Countersunk head screw
ASME B18.3 stainless steel 18-8 plain UNC
SCR-FLT-SOC-(18-8)-4_40X1/4
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
18-8 is comparable with A2 stainless steel. The mechanical properties are based on ASTM F879
Datasheets(X)
 | |
Nominal diameter | 0.112 in |
Length | 0.25 in |
Head diameter | 0.255 in |
Head height | 0.083 in |
Internal drive | HS1/16 inch |
Material | Stainless steel AISI 304, 18-8 |
Surface | Plain |
Number of thread starts per inch | 40 |
Last viewed
Dimple foam For ORSY® system case
Wire stripping and crimping pliers QUADRO
Safety boots, S2
Screw, flattened half round head, with hexagon socket assortment 1000 pieces in system case 4.4.1. ISO 7380-1
Retaining rails EUROFAST® EDF - BAR - FB
C 6.3 TX bit (1/4 inch)
Full face mask
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Sandpaper strip Useit® Superpad wood
GEFU® thread-rolling screw With Taptite 2000® thread, flat cylinder head and hexalobular drive