Countersunk head screw
ASME B18.3 steel alloy plain UNC
SCR-FLT-SOC-ALLOY-1/4_20X1
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
The "alloy" strength class is comparable with the metric strength class 12.9
The hexagon socket screws according to ASME B 18.3 have no strength class designation on the head as they only have one strength class according to the ASTM F835 mechanical properties.
Datasheets(X)
 | |
Nominal diameter | 1/4 in |
Length | 1 in |
Head diameter | 0.531 in |
Head height | 0.161 in |
Internal drive | HS5/32 inch |
Material | Alloy |
Property class | 0 - not applicable |
Surface | Plain |
Number of thread starts per inch | 20 |
Last viewed
Add-on torque wrench head Stahlwille 7370/80 add-on head adapter
Safety boots, S2
Hexagon socket set screw with truncated cone ISO 4026 polyamide 6.6, natural
Adjusting ring and threaded pin DIN 705, shape A and DIN 553 set screw, A1 stainless steel
Quick-release service coupling With SAE male thread
Cut protection glove Uvex C300 foam
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, A4-070 stainless steel, plain
Straight-edge From thick-walled light metal profile with middle web and two plastic end caps
Protective cap for pressure screw For quick-action clamps
Load bar PAT one-piece