Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
DIN 7991 / ISO 10642 plain A2 stainless steel
SCR-CS-ISO10642-A2/070-HS5-M8X145
Register now and access more than 125,000 products
- Due to their head geometry, countersunk head screws have a limited load capacity according to this standard and possibly do not meet tensile or torsional strength requirements.
- The actual mechanical properties of the screw are unchanged and comply with ISO 3506-1
- Depending on the type, these items are supplied with threading almost up to the head
- Countersinks for screw heads in accordance with DIN 7991 and ISO 10642 must comply with DIN 74 shape F
DIN 7991 has been withdrawn and replaced by ISO 10642. There is some limited similarity (some head heights and head diameters have been changed | nominal Ø M18, M22, M24 are omitted | Stainless steels removed | strength classes 10.9 and 12.9 added).
These screws can only be subjected to limited loads due to their head geometry, see DIN EN ISO 3506-1
Datasheets(X)
Last viewed
Pressing socket
Double hook For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems
Interchangeable cylinder cores for locking system MS 5000
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
HSCo Multi Performance machine tap for blind holes DIN 371/376
Thin-walled heat-shrink hose Without internal adhesive
Adjustable straight sealing cone male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with o-ring
Cut protection glove
1-component cold wood glue D4
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain