Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
DIN 7991 / ISO 10642 bare stainless steel A4
SCR-CS-DIN7991-A4/050-HS14-M24X50
Register now and access more than 125,000 products
- Due to their head geometry, countersunk head screws have a limited load capacity according to this standard and possibly do not meet tensile or torsional strength requirements.
- The actual mechanical properties of the screw are unchanged and comply with ISO 3506-1
- Depending on the type, these items are supplied with threading almost up to the head
- Countersinks for screw heads in accordance with DIN 7991 and ISO 10642 must comply with DIN 74 shape F
DIN 7991 has been withdrawn and replaced by ISO 10642. There is some limited similarity (some head heights and head diameters changed | Nominal diameters M18, M22, M24 removed | Strength classes 10.9 and 12.9 added).
These screws can only be subjected to limited loads due to their head geometry, see DIN EN ISO 3506-1
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M24 |
Length (l1) | 50 mm |
Head diameter (dk) | 39 mm |
Head height (k1) | 14 mm |
Internal drive (s1) | HS14 |
Standards | DIN 7991 |
Material | Stainless steel A4 |
Property class | 050 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Countersunk head 60 degree |
Drive type | Hexagon socket |
Thread type | Metric thread |
Thread form | Standard metric thread |
Thread design | Full thread |
Product class | A |
Last viewed
Shield clamps without feet
Split pin DIN 94, steel, plain
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
Connector, pneumatic
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Twist drill bit HSS DIN 1897 type RN
Sealing plug W.TEC® COVER CAP WP 300 F Polyethylene, natural
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Wedge lock washer W.TEC series Narrow shape
Type SK coupling sleeve With hexagon socket