Countersunk head screw with hexagon socket ISO 10642, steel 12.9, plain
ISO 10642 steel 012.9, bare
SCR-CS-ISO10642-012.9-HS5-M8X30
Register now and access more than 125,000 products
ISO 10642 replaces DIN 7991 | There is some limited similarity (some head heights and head diameters have been changed | nominal Ø M18, M22, M24 are omitted | Stainless steels removed | strength classes 10.9 and 12.9 added).
These screws can only be subjected to limited loads due to their head geometry, see DIN EN ISO 898-1
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M8 |
Length (l1) | 30 mm |
Head diameter (dk) | 16.43 mm |
Head height (k1) | 4.96 mm |
Internal drive (s1) | HS5 |
Standards | ISO 10642 |
Material | Steel |
Property class | 012.9 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Countersunk head |
Drive type | Hexagon socket |
Thread type | Metric thread |
Thread form | Standard metric thread |
Thread design | Full thread |
Product class | A |
Last viewed
Plastic clip, single
Synthetic corundum sanding tip
Countersunk head screw with recessed head, H DIN 965, steel 8.8, plain
ASME B18.2.1 steel GR5 zinc flake silver (ZFSHL)
Hexagon socket set screw with oval point
Work overall
Work dungarees
Washer DIN 1440, steel, plain, for bolt
W6RX profile half cylinder For keyed alike profile cylinders in original equipment
Knife accessories Martor screw for Trimmex Simplasto 902.59