Countersunk head screw with high head and hexalobular drive
ISO 14582 stainless steel, A2, plain
SCR-CS-ISO14582-A2/70-TX20-M4X16
Register now and access more than 125,000 products
Increase in assembly productivity
When elements are joined using hexalobular (TX) fasteners, the force is transmitted over a large surface area across the flanks of the drive rather than being centred on one point, as is the case with hexagon socket drives, for example. This has a number of advantages:
- Reduced tool wear
- Tool does not slip because force is distributed optimally
- No damage to surface coating
- No wobbling
- Screw locates securely
Hexalobular drives must comply with DIN EN ISO 10664
- As a result, connection elements with hexalobular heads are standardised and can be used all over the world
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M4 |
Length (l1) | 16 mm |
Head height (k1) | 3.01 mm |
Standards | ISO 14582 |
Material | Stainless steel A2 |
Property class | 70 |
Surface | Plain |
Head type | Countersunk head |
Internal drive | TX20 |
Thread type | Metric thread |
Pitch | 0.7 mm |
Last viewed
System insert, unprocessed foam
Polishing pads
Die For standard metric ISO thread HSCo Multi Performance
Wire cable holder
Hexagonal bolt with thread up to the head
Appliance angle seat valve 1/2" with pipe ventilator, printed
Sundström single headband R01-2001
System stacking cabinet For ORSY® system case 8.4.1
Aluminium airline lashing rail without flange
Identification rings, PVC