Countersunk head screw with recessed head, H DIN 965, steel 4.8, nickel-plated (E2J)
DIN 965 steel 4.8 nickel plated H
SCR-CS-DIN965-4.8-H1-(E2J)-M2,5X12
Register now and access more than 125,000 products
DIN 965 has been withdrawn and replaced by ISO 7046 part 1/part 2. There is some limited similarity (some head heights and head diameters have been changed | Thread lengths changed | nominal Ø M1.6 removed | strength class 5.8 and A4-70 omitted | thread lengths changed | recessed head penetration depths changed).
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M2.5 |
Length (l1) | 12 mm |
Head diameter (dk) | 4.7 mm |
Head height (k1) | 1.5 mm |
Standards | DIN 965 |
Material | Steel |
Property class | 4.8 |
Surface | Nickel plated |
RoHS-compliant | Yes |
Head type | Countersunk head |
Head details | 0 - not applicable |
Drive type | Crosshead |
Internal drive | H1 |
Thread type | Metric thread |
Pitch | 0.45 mm |
Thread form | Standard metric thread |
Thread design | 0 - not applicable |
Design | 0 - not applicable |
Product class | A |
Area of application | 0 - not applicable |
Regulated area | 0 - not applicable |
Construction product | 0 - not applicable |
EC declaration of conformity (CE) | 0 - not applicable |
Last viewed
Twist drill bit HSCo DIN 338 MFD Speed
VARIFIX® base plate
Hexagonal bolt with thread up to the head
Rubber block, square For vehicle lifting platforms
Fixing element
Order protector with magnetic fastening
Brad nail, type WY
Hexagon nut, high profile
Sealing plug W.TEC® COVER CAP WP 300 F Polyethylene, natural
Tallinn 3-in-1 parka