Countersunk head screw with recessed head, H DIN 965, steel 4.8, nickel-plated (E2J)
DIN 965 steel 4.8 nickel plated H
SCR-CS-DIN965-4.8-H2-(E2J)-M4X45
Register now and access more than 125,000 products
DIN 965 has been withdrawn and replaced by ISO 7046 part 1/part 2. There is some limited similarity (some head heights and head diameters have been changed | Thread lengths changed | nominal Ø M1.6 removed | strength class 5.8 and A4-70 omitted | thread lengths changed | recessed head penetration depths changed).
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M4 |
Length (l1) | 45 mm |
Head diameter (dk) | 7.5 mm |
Head height (k1) | 2.2 mm |
Standards | DIN 965 |
Material | Steel |
Property class | 4.8 |
Surface | Nickel plated |
RoHS-compliant | Yes |
Head type | Countersunk head |
Drive type | Crosshead |
Internal drive | H2 |
Thread type | Metric thread |
Pitch | 0.7 mm |
Thread form | Standard metric thread |
Product class | A |
Last viewed
Threaded fitting, stainless steel, with ball joint
Adjustable straight sealing cone male fitting ISO 8434-1, zinc-nickel-plated steel, metric male thread with o-ring
Magnetic dish
Ducting clamp Part 1 – Light series
Dowel pins
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Bracket set For wall mounting with REDOSLIDE Z45-H interior sliding door fitting
EPS profile thumbturn cylinder
Button-head rivet
Taper-grooved dowel pin ISO 8745 steel plain