Countersunk head screw with recessed head, H
ISO 7046-2 steel 8.8 zp th-l. pass. H w. sealing
SCR-CS-ISO7046/2-8.8-H3-(ZSML)-M6X30
Register now and access more than 125,000 products
Connection elements with a galvanised chrome (VI)-free zinc-nickel coating (ZSML) offer a more future-proof alternative compared to surfaces containing chrome(VI). The coating consists of a zinc layer with passivation on a (chrome III) basis and sealing coat (top coat with integrated lubricating particles).
Overview of advantages:
- Higher quality replacement of common galvanised coatings such as A2C or A3C
- Adjusted friction coefficient range from 0.09 μ – 0.14 μ due to top coat with integrated lubricating particles
- Thermal capacity up to 120 °C
- Even layer distribution
- Functional and decorative
ISO 7046-2 replaces DIN 965 | There is some limited similarity | some head heights and head diameters changed | thread lengths changed | penetration depths of recessed heads changed | strength class 5.8 and A4-70 removed | screws of strength class 4.8 are included in ISO 7046-1.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M6 |
Length (l1) | 30 mm |
Head diameter (dk) | 11.3 mm |
Head height (k1) | 3.3 mm |
Standards | ISO 7046-2 |
Material | Steel |
Property class | 8.8 |
Surface | Zinc plated thick-layer passivation |
RoHS-compliant | Yes |
Head type | Countersunk head |
Drive type | H |
Internal drive | H3 |
Thread type | Metric thread |
Pitch | 1 mm |
Thread form | Standard metric thread |
Product class | A |
Last viewed
Hexagonal bolt with pin and small hexagon
Hexagon nut
Adhesive remover
Blind rivet, large flat head
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Brother label tape cassette for labellers
Hexagonal bolt, with thread to head and fine thread
1/4 inch torque screwdriver Stahlwille TORSIOMAX 775
Laser range finder WDM 8-14
Brick and tile drill bit