Countersunk screw with hexagon socket head DIN 7991, steel 010.9, plain
DIN 7991 steel 010.9, plain
SCR-CS-DIN7991-010.9-HS2,5-M4X16
Register now and access more than 125,000 products
Manufactured in accordance with DIN 7991. DIN 7991 has been withdrawn and replaced by ISO 10642. There is some limited similarity. (Some head heights and head diameters changed I nominal diameter M18, M22, M24) For new designs, it is recommended to use the more common ISO version.
Countersinking angle:
M3 - M20: 90°
M22 and M24: 60°
Due to their head geometry, these screws can only be subjected to limited loads, see DIN EN ISO 898-1
Datasheets(X)
Thread type x nominal diameter (d1) | M4 |
Length (l1) | 16 mm |
Head diameter (dk) | 8 mm |
Head height (k1) | 2.3 mm |
Internal drive (s1) | HS2.5 |
Standards | DIN 7991 |
Material | Steel |
Property class | 010.9 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Countersunk head |
Drive type | Hexagon socket |
Thread type | Metric thread |
Thread form | Standard metric thread |
Thread design | Full thread |
Product class | A |
Last viewed
Flat washer with chamfer DIN EN ISO 7090, steel, hot-dip galvanised (hdg), hardness class 300 HV
S3 safety boots uvex Heckel Maccrossroad 3.0 6735
Additional printing cost for mud flap
DIN 7997 plug screw Countersunk Phillips head
Protective cap for pressure screw For quick-action clamps
A 708 door handle
Straight pin, unhardened DIN 7, A1 stainless steel, plain
Sweat jacket Fristads Acode 1736 SWB
EASYLUX 12 V/24 V wireless remote control
Blind rivet, flat head