Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
DIN 7991/ISO 10642 plain steel 010.9
SCR-CS-DIN7991-010.9-HS14-M24X150
Register now and access more than 125,000 products
ISO 10642 replaces DIN 7991 | There is some limited similarity (some head heights and head diameters have been changed | nominal Ø M18, M22, M24 are omitted | Stainless steels removed | strength classes 10.9 and 12.9 added).
These screws can only be subjected to limited loads due to their head geometry, see DIN EN ISO 898-1
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M24 |
Length (l1) | 150 mm |
Head diameter (dk) | 39 mm |
Head height (k1) | 14 mm |
Internal drive (s1) | HS14 |
Standards | DIN 7991 |
Material | Steel |
Property class | 010.9 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Countersunk head 60 degree |
Drive type | Hexagon socket |
Thread type | Metric thread |
Thread form | Standard metric thread |
Thread design | Partial thread |
Product class | A |
Last viewed
Building services trainee set, plumbing and HVAC 22 pieces
Washer DIN 1440, steel, plain, for bolt
Protective glove, chemicals
Hexagonal bolt with shank DIN 931, steel 10.9, plain
Castellated nut, low profile with fine thread DIN 937, steel, 17H/22H, plain
Shim ring DIN 988, zinc-plated steel
ASME B18.5 steel A307 A plain
90° angled male fitting ISO 8434-1, stainless steel 1.4571, tapered BSPT male thread
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
Horizontal drain Point