Countersunk screw with hexagon socket head DIN 7991, plain 8.8 steel
DIN 7991 steel 08.8, plain
SCR-CS-DIN7991-08.8-HS10-M16X50
Register now and access more than 125,000 products
Manufactured in accordance with DIN 7991. DIN 7991 has been withdrawn and replaced by ISO 10642. There is some limited similarity. (Some head heights and head diameters changed | nominal diameter M18, M22, M24) For new designs, it is recommended to use the more common ISO version.
Countersinking angle:
M3 - M20: 90°
M22 and M24: 60°
Due to their head geometry, these screws can only be subjected to limited loads, see DIN EN ISO 898-1
Thread type x nominal diameter (d1) | M16 |
Length (l1) | 50 mm |
Head diameter (dk) | 30 mm |
Head height (k1) | 7.5 mm |
Internal drive (s1) | HS10 |
Standards | DIN 7991 |
Material | Steel |
Property class | 08.8 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Countersunk head |
Drive type | Hexagon socket |
Thread type | Metric thread |
Thread form | Standard metric thread |
Product class | A |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Blind rivet, open, with break mandrel and countersunk head ISO 15984, countersunk head, A2/A2 stainless steel
Hexagon Socket Head Cap Screw ISO 4762, 10.9 steel with silver zinc-flake coating (ZFSHL)
Flat washer without chamfer ISO 7089 steel 200 HV, zinc-nickel black (ZNBH)
Nature shorts
Sandpaper roll Klingspor PS 22 N
VARIFIX® retaining clips zinc-plated
Machinist's hammer German design in accordance with DIN 1041
Chemical protective suit Asatex XT500 flame-retardant chemical protective overalls
Threaded rod DIN 976-1 (type A) with standard metric ISO thread, A4 stainless steel
Work dungarees Planam Visline
