Countersunk screw with hexagon socket head
DIN 7991 steel 08.8, plain
SCR-CS-DIN7991-08.8-HS4-M6X75
Register now and access more than 125,000 products
Manufactured in accordance with DIN 7991. DIN 7991 has been withdrawn and replaced by ISO 10642. There is some limited similarity. (Some head heights and head diameters changed | nominal diameter M18, M22, M24) For new designs, it is recommended to use the more common ISO version.
Countersinking angle:
M3 - M20: 90°
M22 and M24: 60°
Due to their head geometry, these screws can only be subjected to limited loads, see DIN EN ISO 898-1
Datasheets(X)
Thread type x nominal diameter (d1) | M6 |
Length (l1) | 75 mm |
Head diameter (dk) | 12 mm |
Head height (k1) | 3.3 mm |
Internal drive (s1) | HS4 |
Standards | DIN 7991 |
Material | Steel |
Property class | 08.8 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Countersunk head |
Drive type | Hexagon socket |
Thread type | Metric thread |
Thread form | Standard metric thread |
Product class | A |
Last viewed
Hexagonal bolt with shank
Cylindrical pin with female thread, unhardened DIN 7979, shape C, unhardened
Washer shape M
Stand-off installation system Amo®-Max spacer
Cylindrical grooved pin with chamfer ISO 8740, steel, plain
Divider assortment With compartment rails and compartment dividers for system dimensions 12.6
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-plated, thick-film passivated (ZSML)
Longlife lamella flap disc for steel/stainless steel
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment