Countersunk screw with hexalobular head
ISO 14581 plain steel 04.8
SCR-CS-ISO14581-04.8-TX6-M2X5
Register now and access more than 125,000 products
Increase in assembly productivity
When elements are joined using hexalobular (TX) fasteners, the force is transmitted over a large surface area across the flanks of the drive rather than being centred on one point, as is the case with hexagon socket drives, for example. This has a number of advantages:
- Reduced tool wear
- Tool does not slip because force is distributed optimally
- No damage to surface coating
- No wobbling
- Screw locates securely
Hexalobular drives must comply with DIN EN ISO 10664
- As a result, connection elements with hexalobular heads are standardised and can be used all over the world
- Head dimensions in ISO 14581 countersunk screws are gauged in accordance with ISO 7721
- Some screws with short dimensions are threaded up to the head, see ISO 14581
- Countersinks for screw heads in accordance with ISO 14581 must comply with ISO 15065
 | |
Thread type x nominal diameter (d1) | M2 |
Length (l1) | 5 mm |
Head diameter (dk ) | 3.8 mm |
Head height (k1) | 1.2 mm |
Standards | ISO 14581 |
Material | Steel |
Property class | 04.8 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Countersunk head |
Drive type | Internal hexalobular |
Internal drive | TX6 |
Thread type | Metric thread |
Pitch | 0.4 mm |
Thread form | Standard metric thread |
Product class | A |
Datasheets(X)
Last viewed
Washer ISO 7089 brass plain
Shroud turnbuckle closed with fork/terminal
Low-cut safety shoes S1P
Screw, pan head
Hexagon Socket Head Cap Screw
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with seal
GEFU® thread-rolling screw With Taptite 2000® thread, flat head with hexalobular drive
A 607 FS door handle
Countersunk head screw with H cross recess ISO 7046-2, A2-70 stainless steel, plain
Pipe fastening clamp DIN 3016, shape D, A2 stainless steel, EPDM, BASIC-Line
