Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
DIN 7982 A2 sst, cntrsnk hd H, shape C
SCR-CS-DIN7982-C-H2-A2-3,9X55
Register now and access more than 125,000 products
- Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
- Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
- Shape C = thread with tip
- Shape F = Thread without tip
- Shape R = Thread with rounded tip
Stainless steel tapping screws are weaker than case-hardening steel tapping screws. This means that these screws cannot form a counter thread in sheet steel. For this reason, they are used in soft materials such as aluminium only.
Datasheets(X)
CAD data (available after login)
 | |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Form | C |
Nominal diameter (d1) | 3.9 mm |
Length (l1) | 55 mm |
Head diameter (dk) | 7.5 mm |
Head height (k1) | 2.3 mm |
Internal drive | H2 |
Drive type | H |
Head type | Countersunk head 80 degree |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Declaration of performance (EU-CPR) | No |
Shape of tip | C |
Last viewed
Useit® Superpad sanding system dust-free, dust disc
Flexible electrical conduit WFKuS-EM-F-Project ComfortXQ® With high-glide transparent inner coating
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-plated, blue passivated (A2K)
Assembly wedge set
Hose clamp DIN 3017-1, shape A, W2, BASIC-Line
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, brass, plain
Tool assortment 37 pieces in system case
Lock with 2 keys For Standard workshop trolleys
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Universal protector GPN 600 Polyethylene, natural