Countersunk tapping screw, shape F with Z recessed head DIN 7982, steel, zinc-plated, blue passivated
DIN 7982 steel zinc ptd. counters. head Z shape F
SCR-CS-DIN7982-F-Z2-(A2K)-3,9X16
Register now and access more than 125,000 products
Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
Shape C = thread with tip
Shape F = thread without tip
Shape R = thread with rounded tip
Datasheets(X)
 | |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Form | F |
Nominal diameter (d1) | 3.9 mm |
Length (l1) | 16 mm |
Head diameter (dk) | 7.5 mm |
Head height (k1) | 2.3 mm |
Internal drive | Z2 |
Drive type | Z |
Head type | Countersunk head 80 degree |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Declaration of performance (EU-CPR) | No |
Shape of tip | F |
Last viewed
Immersion pipe for trap Polypropylene white
HSCo Multi Special MF thread machine tap for blind holes DIN 374
Special mechanic's glove Uvex HexArmor® ThornArmor® 3092
Wedge lock washer Nord-Lock, wide shape (NLspss)
Cable grommet PVC
Cylindrical pin with female thread DIN 7979, steel plain, hardened, tolerance class m6
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
Disposable protective hood uvex 9861
Hexagonal bolt with shank and fine thread
Abrasive flap disc Klingspor SMT 924 Special