Crimp cable lug fork shape
Crimp cable lug DIN 46234 fork shape
CRMPCBLUG-DIN46234-M5,0/1SMM
Register now and access more than 125,000 products
Datasheets(X)
Min./max. wire cross section | 0.5-1 mm² |
Flange hole | M5 |
Distance between sleeve end and centre of hole (l) | 12.8 mm |
Sleeve length | 5 mm |
Width (b) | 10 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
System insert 2.4.1, socket wrench 1/4 inch
Countersunk tapping screw, shape C with hexalobular drive
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Linear grid with wave design, flat/super flat For flat line-drainage shower board, super-flat line-drainage shower board, super-flat shower channel
Jamo plus 4 CSMP screw for adjustable distance mounting Steel zinc-plated partial thread with underhead thread for adjusting the countersunk head with milling pockets
VARIFIX® sliding nut
REDOSLIDE Z60/100-HS synchronous controller
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Hexagonal bolt with shank ISO 4014, steel 5.6, zinc-plated thick-film passivated (ZSML)
Hammer drill bit Max Quadro-S