Crimp cable lug, pin shape DIN 46230 and similar
Crimp cable lug pin shape
CRMPCBLUG-DIN46230-1,5-2,5SMM
Register now and access more than 125,000 products
For multi, fine, and very fine-wired copper conductors, e.g. according to DIN EN 60228 Class 2, 5, and 6
The user must check the inserted cable (using a pull-out test, if required)
Datasheets(X)
Min./max. wire cross section | 1.5-2.5 mm² |
Wire diameter (d1) | 2.3 mm |
Sleeve length | 5 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Width of pin | 1.9 mm |
Last viewed
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Soft-face hammer Halder SIMPLEX soft-face hammer Series 3008
ASSY®plus VG 4 CSMP construction screw Steel zinc plated full thread countersunk milling pocket head
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with seal
Low-cut safety shoes, S3
Dispenser system manual SKIN LINE
S1PL safety shoe New Balance Logic 2143
Slotted flat-head screws with large head DIN 921, steel 5.8, plain
Cross bar rod
Low-cut safety shoes, S1