Crimp cable lug, pin shape DIN 46230 and similar
Crimp cable lug pin shape
CRMPCBLUG-DIN46230-70,0SMM
Register now and access more than 125,000 products
For multi, fine, and very fine-wired copper conductors, e.g. according to DIN EN 60228 Class 2, 5, and 6
The user must check the inserted cable (using a pull-out test, if required)
Datasheets(X)
Wire cross section | 70 mm² |
Wire diameter (d1) | 11.2 mm |
Sleeve length | 24 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Width of pin | 11 mm |
Last viewed
Hexagonal bolt with thread up to the head
Work jacket
Hinge pin For shutter hinges
Raised countersunk tapping screw, C shape with H recessed head
Paint spray, silk gloss
Twist drill bit HSCo DIN 340 type RN OXIDE
Connector, pneumatic
Hexagon head serrated screw with flange W-0274, steel 8.8, zinc-plated, blue passivated (A2K)
STC end mill Speedtwister-Inox, extra long XL, five cutting edges, uneven angle of twist gradient, 5xD
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly