Cross EN1254, gunmetal, 4180
EN1254 gunmetal 4180
FITT-CRS-ILE/ILE/ILE/ILE-RB-22-4180
Register now and access more than 125,000 products
- For universal use in various applications
- Conforms to many different international certification systems such as DVGW, KIWA and SVGW
The suitability for drinking water is confirmed by DVGW type examination certificate DV-7401AS2289 and by ÜA registration certificate no. R-15.2.3-20-17025.
Datasheets(X)
- Drinking water installations DIN EN 806 and DIN 1988
- Natural gas installations DIN EN 1775 and DVGW G 600 (TRGI)
- LPG installations, technical rules for LPG (TRF)
- Heating oil supply systems DIN 4755 (TRÖ)
- Hot water heating DIN EN 12828
- Local and district heating lines DIN 4747
- Thermal solar systems
- Water-based room cooling systems
- Compressed air
- Equipment for the distribution of technical gases
- Rainwater harvesting systems DIN 1989
- Fire-extinguishing pipes DIN 14462
- Sprinkler systems VdS CEA 4001
- Industrial and process water
- Wastewater pumping stations
 | |
Nominal diameter | 22 mm |
Nominal diameter 2 | 22 mm |
Nominal diameter 3 | 22 mm |
Nominal diameter 4 | 22 mm |
Length (a) | 29 mm |
Length 4 (Z/Za) | 29 mm |
Connection type | 1. connection internal soldering |
Material | Red bronze - gunmetal |
Surface | Plain |
Last viewed
Hexalobular-type cheese head screw, low head
Handle plate on outer plate
Low-cut safety shoe S3
Nylon Sanding Disc With reinforced nylon fleece
Welder’s S3 safety boots
Slotted raised countersunk head screw DIN 964, brass, plain
Twist drill bit HSCO DIN 338 SMART STEP
Accessories, hammers Halder hammer insert Series 3208
Universal hook
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain