Cross assembly jig
Hinge drilling jig
HNGEDRLJIG-(SBL-3)
Register now and access more than 125,000 products
- With two drill bushings with 5 mm ∅ in a 32 mm spacing grid
- Edge distance 37 mm
- Transfer of the mounting plate position to the hinge drilling jig via the scale
Specified dimensions not binding. Subject to technical changes!
Material | Steel / plastic |
Hole distance | 32 mm |
Diameter of hole | 5 mm |
Distance between stop and centre of hole | 37 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Cable tie made of polyamide with re-opening plastic tongue
Milling bit Ruko tungsten carbide milling bit type M pointed cone (SKM) plain
Retaining pin For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems
Lower ladder section For aluminium extension ladders
Hexagonal bolt
Square solid spindle 8 mm
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Work dungarees Stretch X
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Ventilation and bird screen profile
