Cross-hole countersink Ruko conical countersink with cross hole 90° HSCo plain
Cross-hole countersink HSCo plain 90° Ruko
CNTSNKCONE-RUKO-102300E-90GRD-D1,0-4,0
Register now and access more than 125,000 products
The chip flow through the hole prevents the chips from binding in the workpiece.
Ideal for burr- and chatter-free deburring and countersinking of steel, cast iron, non-ferrous and light metals. Optimal results at a low cutting speed.
Countersink with blade is not recommended for full countersinking.
Datasheets(X)
Min./max. spot-facer diameter | 4-1 mm |
Head diameter | 6.4 mm |
Length | 45 mm |
Shank diameter | 6.4 mm |
Material | High-speed steel with 5% cobalt content |
Countersink angle | 90 Degree |
Last viewed
Hose clamp with corrugated spring
Hexagon socket set screw with flattened tip ISO 4027, A2 stainless steel, 21H, plain
Protection sleeve
Work trousers
Mixing paddle M II For powdery and adhesive materials
Solid carbide quarter circle profile cutter
Work shorts
Hexalobular-type cheese head screw ISO 14579, A2-070 stainless steel, plain
Safety boots, S2
ASSY® 4 A2 RCS wood façade screw A2 stainless steel plain partial thread raised countersunk head