Cross-hole countersink Ruko conical countersink with cross hole 90° HSCo plain
Cross-hole countersink HSCo plain 90° Ruko
CNTSNKCONE-RUKO-102301E-90GRD-D2,0-5,0
Register now and access more than 125,000 products
The chip flow through the hole prevents the chips from binding in the workpiece.
Ideal for burr- and chatter-free deburring and countersinking of steel, cast iron, non-ferrous and light metals. Optimal results at a low cutting speed.
Countersink with blade is not recommended for full countersinking.
Datasheets(X)
Min./max. spot-facer diameter | 5-2 mm |
Head diameter | 10 mm |
Length | 45 mm |
Shank diameter | 6 mm |
Material | High-speed steel with 5% cobalt content |
Countersink angle | 90 Degree |
Last viewed
Protective glove, leather
Cut protection glove
Filter element for compressed air conditioning unit size 2
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Hexagon Socket Head Cap Screw with centre, with low head
Sealing washers DIN 7603, steel, plain, shape A
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, metric male thread with seal
Identification rings, PVC
WÜPOFAST® nickel-plated chipboard screw Nickel-plated steel, full thread, raised countersunk head, PZ
Washer nut