Cross-hole countersink Ruko conical countersink with cross hole 90° HSS plain
Cross-hole countersink HSS plain 90° Ruko
CNTSNK-RUKO-102303-HSS-90G-D10,0-15,0
Register now and access more than 125,000 products
The chip flow through the hole prevents the chips from binding in the workpiece.
Ideal for burr- and chatter-free deburring and countersinking of steel, cast iron, non-ferrous and light metals. Optimal results at a low cutting speed.
Countersink with blade is not recommended for full countersinking.
Datasheets(X)
Min./max. spot-facer diameter | 15-10 mm |
Head diameter | 21 mm |
Length | 65 mm |
Shank diameter | 10 mm |
Material | HSS |
Countersink angle | 90 Degree |
Last viewed
Insect remover
Label carrying system for identification rings
NP profile double cylinder In 6-pin system
Helical insert W.TEC® INSERT COIL Free Running fine thread
Hexagonal bolt with thread up to the head ISO 4017, brass, nickel-plated
Protective glove, nitrile
Plastic frame anchor W-UR F 10 SymCon® with hexagon head bolt, A4 stainless steel
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Flat washer
Tool case with all common tools Assortment of 63 pieces