Cross-hole countersink Ruko conical countersink with cross hole 90° HSS plain
Cross-hole countersink HSS plain 90° Ruko
CNTSNK-RUKO-102304-HSS-90G-D15,0-20,0
Register now and access more than 125,000 products
The chip flow through the hole prevents the chips from binding in the workpiece.
Ideal for burr- and chatter-free deburring and countersinking of steel, cast iron, non-ferrous and light metals. Optimal results at a low cutting speed.
Countersink with blade is not recommended for full countersinking.
Datasheets(X)
Min./max. spot-facer diameter | 20-15 mm |
Head diameter | 28 mm |
Length | 85 mm |
Shank diameter | 12.0 mm |
Material | HSS |
Countersink angle | 90 Degree |
Last viewed
Hexagonal bolt with shank DIN 601/ISO 4016, steel 4.8, zinc-plated, blue passivated (A2K), with nut
Connector, pneumatic
Work dungarees
Connector, pneumatic
Raised countersunk tapping screw, shape C with Z recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), PZ drive, round head, shape C
Hexagonal bolt with shank DIN 601/ISO 4016, steel 4.8, zinc-plated, blue passivated (A2K), with nut
Nature shorts
Façade construction screw Faba® type BZ with hexagon head and sealing washer
High-visibility jacket
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated