Cross-hole countersink Ruko conical countersink with cross hole 90° HSS plain
Cross-hole countersink HSS plain 90° Ruko
CNTSNKCONE-RUKO-102301-HSS-90G-D2,0-5,0
Register now and access more than 125,000 products
The chip flow through the hole prevents the chips from binding in the workpiece.
Ideal for burr- and chatter-free deburring and countersinking of steel, cast iron, non-ferrous and light metals. Optimal results at a low cutting speed.
Countersink with blade is not recommended for full countersinking.
Datasheets(X)
Min./max. spot-facer diameter | 5-2 mm |
Head diameter | 10 mm |
Length | 45 mm |
Shank diameter | 6.0 mm |
Material | HSS |
Countersink angle | 90 Degree |
Last viewed
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, A4-070 stainless steel, plain
Split pin DIN 94, steel, plain
Hexagon Socket Head Cap Screw ISO 4762, steel, strength class 8.8, zinc-nickel-plated, black (ZNBHL)
Hexagon socket set screw with ring cutter ISO 4029, steel 45H, zinc-plated, blue passivated (A2K)
TIPP® fixed point bracket 2 pieces
Tyre fitting machine Giuliano S551XLA
Plastic frame anchor W-UR 10 XS W-UR 10 XS for use in perforated brick with small chambers and thin webs in conjunction with the AMO Combi screw
Hexagonal bolt with thread up to head
Hexagon nut with clamping piece and washer
Hexagonal bolt with shank