Cross-hole countersink assortment Ruko 102312T conical and countersink deburring tool set with cross hole 90° HSS TiN, 5 pieces
Cross-hole countersink set HSS TiN 5pcs Ruko
CNTSNKCONE-RUKO-102312T-90GRD-2,0-20,0
Register now and access more than 125,000 products
+ 1 can cutting paste 30 g
The chip flow through the hole prevents the chips from binding in the workpiece.
Ideal for burr- and chatter-free deburring and countersinking of steel, cast iron, non-ferrous and light metals. Optimal results at a low cutting speed.
Countersink with blade is not recommended for full countersinking.
Datasheets(X)
Material | HSS |
Number of pieces in assortment/set | 5 PCS |
Last viewed
System workshop trolley Pro 8.4, equipped
Snow shovel
Twist drill bit HSS DIN 338 type RN 118°
Cable Tie Fix
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)
HSS DIN 338 SMART STEP twist drill bit
Gripper ring
DUO wire end ferrule With plastic sleeve box, type 2