Cross-piece EN1254, gunmetal, 3180
EN1254 gunmetal 3180
FITT-SHRB-EN1254-KREUZ-RG-1/2/3180
Register now and access more than 125,000 products
- For universal use in various areas of application
- Complies with many different international certification systems such as DVGW, KIWA and SVGW
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight %
The drinking water purification is confirmed by the DVGW type examination certificate DV-7401AS2289 and by the Austrian conformity registration certificate no.: R-15.2.3-20-17025.
Datasheets(X)
- Drinking water installations DIN EN 806 and DIN 1988
- Natural gas installations DIN EN 1775 and DVGW G 600 (TRGI)
- LPG installations German Technical LPG Rules (TRF)
- Heating oil utilities DIN 4755 (German Technical Rules for the Installation of Oil Burning Systems – TRÖ)
- Hot water heating systems DIN EN 12828
- Local and district heating pipelines, DIN 4747
- Thermal solar collectors
- Water-circulation-based room cooling equipment
- Compressed air
- Systems for distributing technical gases
- Rainwater harvesting systems, DIN 1989
- Extinguishing lines, DIN 14462
- Sprinkler systems VdS CEA 4001
- Industrial and process water
- Sewage lifting plants
 | |
Nominal diameter | 1/2 in |
Nominal diameter 2 | 1/2 in |
Nominal diameter 3 | 1/2 in |
Nominal diameter 4 | 1/2 in |
Length (a) | 27 mm |
Length 4 (Z/Za) | 14 mm |
Connection thread | R 1/2 inch |
Connection type | 1. connection cylindrical female thread (Rp), 2. connection cylindrical female thread (Rp), 3. connection cylindrical female thread (Rp), 4. connection cylindrical female thread (Rp) |
Material | Red bronze - gunmetal |
Surface | Plain |
Standards | DIN 1254 |
Last viewed
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Manual taper tap Ruko hand tap HSS DIN 352 UNC taper tap
Countersunk head screw
SC long twist drill bit DIN 338
ASSY® 4 RCS fittings screw Steel zinc plated full thread raised countersunk head
Countersunk tapping screw, shape C with hexalobular drive ISO 14586, A2 stainless steel, shape C (with tip)
Breathing protctn systm, vntltd, spr prt
Twist drill bit assortment HSCo DIN 338 Type RN MFD VARIO 25 pieces
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
Screw-in nut, brass with o-ring