Crossover bend, with solder connection and plug-in end EN1254, copper, 5086
EN1254 copper 5086
FITT-SLDR-EN1254-ILE-CU-18/5086
Register now and access more than 125,000 products
- Universally usable in various areas of application such as shipbuilding, mechanical engineering and apparatus construction
- Meets the requirements of various DVGW regulations
- Other certification institutes too such as KIWA, BSI Kitemark, British Gas, Gaz de France, NF, SVGW
Suitability for drinking water is confirmed by DVGW type test certificates DV-7411AO2008 (copper fittings) and DV-7401AS2290 (gunmetal transition fittings). This is also confirmed by ÜA registration certificate no. R-15.2.3-20-17025 for 4000 series and R-15.2.3-20-17026 for 5000 series.
Datasheets(X)
- Drinking water installations DIN EN 806 and DIN 1988
- Natural gas installations DIN EN 1775 and DVGW G 600 (TRGI)
- LPG installations, technical rules for LPG (TRF)
- Heating oil supply systems DIN 4755 (TRÖ)
- Hot water heating DIN EN 12828
- Local and district heating lines DIN 4747
- Thermal solar systems
- Water-based room cooling systems
- Refrigeration equipment (ACR)
- Pneumatic
- Equipment for the distribution of technical and medical gases
- Rain water utilisation systems DIN 1989
- Fire-extinguishing pipes "wet" DIN 14462
- Sprinkler systems "wet" VdS CEA 4001
- Industrial and process water
- Wastewater pumping stations
 | |
Nominal diameter | 18 mm |
Nominal diameter 2 | 18 mm |
Length (a) | 103 mm |
Length 2 (b) | 45 mm |
Length 3 (c) | 40 mm |
Length 4 (Z/Za) | 90 mm |
Connection type | 1. connection internal soldering |
Material | Copper |
Surface | Plain |
Last viewed
Service tool case Made of HDPE, mobile
Safety boots, S2
Shim ring DIN 988, steel, plain
Twist drill bit HSS DIN 338 type RN 130°
Hexagon socket set screw with ring cutter ISO 4029, steel, 45H, plain
Rust remover Rost-Off
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 DIN 7990, steel 5.6, hot-dip galvanised (hdg)
Shoe accessories
TIPP® fixed point bracket 2 pieces
SC long twist drill bit DIN 338