Crossover bend, with solder connection and plug-in end EN1254, copper, 5086
EN1254 copper 5086
FITT-SLDR-EN1254-ILE-CU-22/5086
Register now and access more than 125,000 products
- Universally usable in various areas of application such as shipbuilding, mechanical engineering and apparatus construction
- Meets the requirements of various DVGW regulations
- Other certification institutes too such as KIWA, BSI Kitemark, British Gas, Gaz de France, NF, SVGW
Suitability for drinking water is confirmed by DVGW type test certificates DV-7411AO2008 (copper fittings) and DV-7401AS2290 (gunmetal transition fittings). This is also confirmed by ÜA registration certificate no. R-15.2.3-20-17025 for 4000 series and R-15.2.3-20-17026 for 5000 series.
Datasheets(X)
- Drinking water installations DIN EN 806 and DIN 1988
- Natural gas installations DIN EN 1775 and DVGW G 600 (TRGI)
- LPG installations, technical rules for LPG (TRF)
- Heating oil supply systems DIN 4755 (TRÖ)
- Hot water heating DIN EN 12828
- Local and district heating lines DIN 4747
- Thermal solar systems
- Water-based room cooling systems
- Refrigeration equipment (ACR)
- Pneumatic
- Equipment for the distribution of technical and medical gases
- Rain water utilisation systems DIN 1989
- Fire-extinguishing pipes "wet" DIN 14462
- Sprinkler systems "wet" VdS CEA 4001
- Industrial and process water
- Wastewater pumping stations
 | |
Nominal diameter | 22 mm |
Nominal diameter 2 | 22 mm |
Length (a) | 117 mm |
Length 2 (b) | 54 mm |
Length 3 (c) | 40 mm |
Length 4 (Z/Za) | 102 mm |
Connection type | 1. connection internal soldering |
Material | Copper |
Surface | Plain |
Last viewed
Slotted countersunk head screw DIN 963, A2 stainless steel, plain
Cleaning brush For masonry with M6 connecting thread
Cut protection glove
VARIFIX® Systemfix quick fastener For assembly connection of all VARIFIX® 26/18; 26/26; 28/28 and 36/36 mounting rails
ISO insert holder with P clamping system for SN indexable inserts
Dry sandpaper disc Mirka Gold
Akura 44 profile thumbturn cylinder
Bracket set for variable wooden rear wall DWD XP
Cable duct for table frame TMQ70/3
Hexagonal bolt with thread up to head for pressure container construction ISO 4017, steel 5.6, plain