Cut protection glove Ansell HyFlex® 11-518
Cut protection glove Ansell HyFlex 11-518
PROTGLOV-ANSELL-HYFLEX-11-518-SZ6
Register now and access more than 125,000 products
- An extremely lightweight material and tailored fit, including D3 knit on the deeper-set little finger, means the glove feels as if you are working with your bare hands.
- The extremely soft, seamless support material keeps the hands cool and dry due to its breathability. Further advantages are increased flexibility, high tactile sensitivity in the fingertips and outstanding comfort.
Datasheets(X)
- Final assembly
- Handling and installation of extremely small, sharp-edged parts
- Assembling injection-moulded parts
- Processing special metal mixtures
- Packaging areas with risk of cutting
- Punching - light and dry
- Wire installation and mounting
Size | 6 |
Gauge | 18 |
Material of liner | Dyneema® |
Material of coating | Polyurethane |
Colour | Blue |
Standards | EN 388 |
Cut resistance according to ISO 13997 | B |
Category | II |
Last viewed
Pewag PLAW Alpha hoist ring
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Protective glove, synthetic
Hexagon Socket Head Cap Screw
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, plain
Telescopic extension rod With safety device
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, zinc-plated, blue passivated (A2K)
Slotted set screw with tip ISO 7434, steel 14H, plain
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6