Cut protection glove
Cut protection glove Uvex Impact 1
CUTPROTGLOV-UVEX-IMPACT1-60598-SZ9
Register now and access more than 125,000 products
Seamless cut protection glove with protectors for tough activities especially in the oil and gas industry
- Palm and finger tips with NBR coating (nitrile rubber) and grip finish
- Very high level of cut protection due to the HPPE glass fibre combination
- Good grip in dry and wet areas
- Good protection from knocks and bumps through the extra padded palm
- Protectors on back of hands and reinforced sections on finger joints
- Good fit
- High flexibility
- Very comfortable
- Flexible rip-tape fastening
Datasheets(X)
- Work activities with high mechanical stress
- Mining
- Oil and gas industry
- Heavy construction work
Size | 9 |
Material of liner | HPPE |
Colour | Black, Yellow |
Standards | EN 388 |
Last viewed
Shroud turnbuckles Closed with fork/terminal
Hammer drill bit Max Quadro-L Vario
Akura 44 profile thumbturn cylinder
Thread repair single set TIME-SERT® 14 pieces
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Red brass extensions With DVGW (German Technical and Scientific Association for Gas and Water) GW 393 approval (sizes from ½ inch x 17.5 mm)
Clamping pins (sleeves) assortment 1100 pieces in system case 4.4.1. ISO 8752
Hexagon head bolt with shank and fine thread ISO 8765, steel 10.9, zinc-nickel, silver (ZNSHL)
GEFU® thread-rolling screw With Taptite 2000® thread, flat head with hexalobular drive
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment