Cut protection glove Ejendals TEGERA® 436
Cut protection glove Ejendals Tegera 436
CUTPROTGLOV-TEGERA-436-SZ9
Register now and access more than 125,000 products
- Multi-purpose cut protection glove (class D/ANSI class A4) with special reinforcement between thumb and index finger and touchscreen functionality.
- The PU-coated palm ensures good fingertip sensitivity and good grip on dry, damp and slightly oily surfaces.
- 13 gg yarn made of polyester and elastane with HPPE cut protection fibre.
- High abrasion resistance.
Datasheets(X)
Size | 9 |
Length | 270 mm |
Gauge | 13 |
Material of liner | Polyester/spandex/high-performance polyethylene |
Material of coating | Polyurethane |
Colour | Black |
Standards | ISO 21420, EN 388 |
Cut resistance according to ISO 13997 | D |
Category | II |
Last viewed
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Folding metre rule, internal hinges
Hexagonal bolt, fully threaded with nut, SB fittings, DIN EN 15048-1 ISO 4017, A4-70 stainless steel, plain, with nut ISO 4032
Thin-walled heat-shrink hose Without internal adhesive
1/2 inch POWERDRIV® socket wrench insert metric, bi-hex, long
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, plain
Straight male fitting ISO 8434-1, stainless steel 1.4571, tapered BSPT male thread
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, zinc-plated blue passivated (A2K)
Manual taper tap Ruko hand tap HSS DIN 2181 fine thread taper tap
Work trousers