Cut protection glove
Cut protection glove Uvex Unidur 6659 foam
PROGLOV-UVEX-UNIDUR-6659-FOAM-60938-SZ9
Register now and access more than 125,000 products
The uvex unidur 6659 foam is a lightweight cut protection glove (level 5/C) with NBR foam coating. The glove also provides excellent touch sensitivity. It is ideal for fine assembly, where high tactility and cut resistance are required.
- Palm and finger tips with nitrile foam coating
- Outstanding mechanical abrasion resistance due to the NBR foam coating, facilitates a long service life
- Good grip in dry and slightly damp areas
- Very high level of cut protection due to the HPPE/glass fibre combination
Datasheets(X)
- Automotive industry
- Assembly
- Maintenance
- Metal working
- Freight forwarding/logistics
Size | 9 |
Material of liner | HPPE |
Material of coating | Nitrile foam |
Colour | Mottled grey, Black |
Standards | EN 388 |
Last viewed
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, brass, nickel-plated
E90 fire protection duct inner corner
EPS profile double cylinder
C 6.3 PH bit (1/4 inch)
Twist drill bit HSS DIN 338 type RN 118°
pias® drilling screw, flat head with AW drive
Segmented Grinding Disc for Steel Synthetic corundum
High-visibility work dungarees
Slide hammer for internal pullers with M7 and M10 thread