Cut protection glove Uvex HexArmor® 9000 Series™ 9013
Cut-resistant glove Uvex HexArmor 9013
CUTPROTGLO-UVEX-HXARMR-9013-60984-SZ9
Register now and access more than 125,000 products
- Excellent dexterity for cut protection level F
- One layer of SuperFabric®* brand material for protection against dangers using a configuration of tiny protective plates, which are layered on top of each other on high-performance materials - an exclusively licensed solution for HexArmor®
- Coating made from a high-quality mixture of polyethylene and fibreglass
- High durability for long lasting protection
- Washable
- Very lightweight protective glove
- Seamless design for improved wearing comfort while retaining high dexterity and a tactile feel
- The black textured nitrile dip coating on the palm increases the tear and abrasion resistance and offers an exceptionally good grip in dry and very oily applications
- Knitted cuffs prevent dirt and debris from entering the gloves
Datasheets(X)
Size | 9 |
Length | 260 mm |
Material of liner | High-performance polyethylene/fibre glass/polyester |
Material of coating | Nitrile |
Standards | EN 388 |
Category | II |
Last viewed
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Hexagon head serrated screw with flange
Low-cut safety shoes S3 Ejendals Jalas 7138 Zenit Evo
Milling bit Ruko tungsten carbide milling bit type A cylinder (ZYAS) with spur cut plain
Drill bushing DIN 179, steel, plain, shape A
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Hexagonal bolt with thread up to head for pressure container construction DIN EN ISO 4017, A4 stainless steel
Feather key, high shape DIN 6885, steel, plain, shape B
Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated