Cut protection glove Uvex phynomic C XG ESD
Cut-resistant glove Uvex phynomic C XG ESD
CUTPROTGLO-UVEX-PNMC-CXG-ESD-60048-SZ9
Register now and access more than 125,000 products
- Light and sensitive glove with high level of cut protection and ESD function for mechanical work in damp and oily areas
- Palm and fingertips with aqua polymer Xtra-Grip coating
- Suitable for use with touchscreens
- Excellent fit, fits like a second skin
- Excellent dexterity and fingertip sensitivity
- High breathability due to the open-cell foam coating
- Perfect fit thanks to the slim-fit design and 3D ergo technology
- Free from harmful substances in accordance with OEKO-TEX® Standard 100
- Certified in accordance with EN 388 (3 X 4 2 C), DIN EN 16350:2014
- ESD function protects workpieces from electrostatic discharge
- Suitable for work in potentially explosive areas
- Excellent grip in oily, slightly damp and dry areas
- Excellent mechanical resistance to abrasion from the aqua polymer Xtra-Grip coating
- High level of cut protection and high resistance to tearing due to the optimum material composition
Datasheets(X)
Size | 9 |
Length | 250 mm |
Material of liner | HPPE/fibre glass/polyamide/carbon/elastane |
Material of coating | Nitril foam / water-based polyurethane |
Standards | EN 388 |
Category | II |
Last viewed
Rubber grommets made of polychloroprene rubber Insulating sleeves CR
Securing plate DIN 3017-2, type VS, W.TEC series
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Earthing strap clamp, stainless steel In accordance with DIN VDE 0100 and DIN VDE 0190
Rotary shaft sealing ring DIN 3760, plastic NBR, shape A
LED contour light with 90° lamp arm 12V/24V
AL 900 door handle on outer plate With CK punch
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Clamping mandrel with quick-change function