Cut protection glove Uvex phynomic F XG protexxion zone
Cut-resistant glove Uvex phynomic F XG protexxion
CUTPROTGLO-UVEX-PYNOMIC-FXG-60094-SZ6
Register now and access more than 125,000 products
- Light and sensitive cut protection glove with high highest level of cut protection for mechanical work in damp and oily areas
- Palm and fingertips with aqua polymer Xtra-Grip coating
- Suitable for use with touchscreens
- Excellent fit, fits like a second skin
- Excellent dexterity and fingertip sensitivity
- High breathability due to the open-cell foam coating
- Perfect fit thanks to the slim-fit design and 3D ergo technology
- Protective glove is free from allergenic accelerators -
- Certified in accordance with EN 388 (4 X 4 3 F), EN 407 (X 1 X X X X)
- Excellent grip in oily, slightly damp and dry areas
- Excellent mechanical resistance to abrasion from the aqua polymer Xtra-Grip coating
- Very high level of cut protection and high resistance to tearing due to the optimum material composition
- Protection against contact heat up to 100 °C
- With reinforced thumb joint (Uvex protexxion zone)
Datasheets(X)
Size | 6 |
Length | 230 mm |
Material of liner | HPPE/polyamide/steel fiber |
Material of coating | Nitril foam / water-based polyurethane |
Standards | EN 388, EN 407 |
Category | II |
Last viewed
Identification rings, PVC
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Universal glue
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-80 stainless steel, plain
Hexagonal bolt with thread up to head for pressure container construction DIN EN ISO 4017, A2 stainless steel
Nature shorts
EPS profile thumbturn cylinder
Hexagonal bolt, fully threaded with nut, SB fittings, DIN EN 15048-1 ISO 4017, A4-70 stainless steel, plain, with nut ISO 4032