Cut protection glove Uvex phynomic F XG protexxion zone
Cut-resistant glove Uvex phynomic F XG protexxion
CUTPROTGLO-UVEX-PYNOMIC-FXG-60094-SZ8
Register now and access more than 125,000 products
- Light and sensitive cut protection glove with high highest level of cut protection for mechanical work in damp and oily areas
- Palm and fingertips with aqua polymer Xtra-Grip coating
- Suitable for use with touchscreens
- Excellent fit, fits like a second skin
- Excellent dexterity and fingertip sensitivity
- High breathability due to the open-cell foam coating
- Perfect fit thanks to the slim-fit design and 3D ergo technology
- Protective glove is free from allergenic accelerators -
- Certified in accordance with EN 388 (4 X 4 3 F), EN 407 (X 1 X X X X)
- Excellent grip in oily, slightly damp and dry areas
- Excellent mechanical resistance to abrasion from the aqua polymer Xtra-Grip coating
- Very high level of cut protection and high resistance to tearing due to the optimum material composition
- Protection against contact heat up to 100 °C
- With reinforced thumb joint (Uvex protexxion zone)
Datasheets(X)
Size | 8 |
Length | 240 mm |
Material of liner | HPPE/polyamide/steel fiber |
Material of coating | Nitril foam / water-based polyurethane |
Standards | EN 388, EN 407 |
Category | II |
Last viewed
Tapered pin, unhardened DIN 1, plain steel, unhardened, design A (ground)
Work jacket
DWD XP H95 frame
pias® drilling screw, countersunk head with AW drive
Work polo shirt Hakro 810 Classic
Installation box shower tray flush-mounted mixer dry walling
Screw with flattened half round head and hexagon socket ISO 7380-1 A2-070 stainless steel, plain
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Insulation anchor W-ID Easy
HSCo Multi Longlife machine tap for through holes DIN 371/376