Cut protection gloves
Cut protection glove Ansell HyFlex 11-318
CUTPROTGLOV-ANSELL-HYFLEX-11-318-SZ6
Register now and access more than 125,000 products
- The Hyflex® 11-318 significantly increases finger mobility for work involving a risk of cutting injuries: The first uncoated glove to provide EN performance level 3 cut protection with its 18-gauge material.
- Its extremely light fabric feels as if touching with bare hands while keeping hands at a pleasant working temperature.
- The Spandex reinforcements in the elasticated sections of the gloves (wrist and palm) ensure a tight anatomical fit.
- This low-lint glove is also silicone free and anti-static. As a result, your staff and products are well protected. Specific packaging has also been developed to avoid silicone contamination from plastic bags.
- Final assembly of sharp-edged parts
- Packaging
- Quality checks before painting and varnishing work
Size | 6 |
Gauge | 18 |
Material of liner | Dyneema® |
Colour | Grey |
Standards | EN 388 |
Category | II |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with shank and fine thread DIN 960, steel 10.9, zinc-plated, blue passivated (A2K)
Worktop For PRO workbench/work table
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
Safety screw
Paint spray, high gloss
Connecting technology
ASSY® 4 PII CSMP universal screw Steel zinc-plated partial thread with underhead thread milling pocket head
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Glazing packer
