Cut-resistant glove Ansell Edge 48-711
Cut-resistant glove Ansell Edge 48-711
PROTGLOV-ANSELL-EDGE-48-711-SZ5
Art.-no. 1931082351
EAN 4099618416903
Register now and access more than 125,000 products
- Seamless backing, PU palm coating.
- Cut protection glove with seamless backing and knitted cuffs for a close fit.
- PU palm coating to protect in slightly oily work areas.
- Economical alternative to gloves made of medium-weight leather, thick cotton or aramid fibres.
Datasheets(X)
Size | 5 |
Length | 220 mm |
Gauge | 13 |
Material of liner | Polyester/spandex/high-performance polyethylene |
Material of coating | Polyurethane |
Colour | Grey |
Standards | ISO 21420:2020, EN 388 |
Cut resistance according to EN ISO 13997 | B |
Category | II |
Last viewed
Hexagonal bolt with shank for pressure container construction ISO 4014, steel 5.6, plain
Red brass extensions with DVGW (German Technical and Scientific Association for Gas and Water) GW 393 approval (sizes from ½ inch x 17.5 mm)
Workbench electrically height-adjustable
Parallel pin with chamfered ends DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h11
1/2 inch CV plier wrench set 4 pieces
Double cylinder S5 locking system
Hexagon bolt with shank ISO 4014, steel 10.9, plain
4KS profile double cylinder for keyed-alike original systems
Hexagon bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hexagon bolt with thread up to the head ISO 4017, brass, nickel-plated