Cut-resistant glove Ejendals TEGERA® 806
Cut protection glove Ejendals Tegera 806
CUTPROTGLOV-TEGERA-806-ESD-SZ9
Register now and access more than 125,000 products
Very thin ESD glove liner with class C cut resistance due to TEGERA® CRF® technology. For ESD-protected areas where cut resistance and maximum fingertip sensitivity are required. Thin 18 gg fibre and highly breathable for all-day comfort.
Datasheets(X)
Size | 9 |
Length | 265 mm |
Gauge | 18 |
Material of liner | High-performance polyethylene/fibre glass/polyester/nylon/spandex |
Colour | Blue |
Standards | ISO 21420:2020, EN 388, EN 16350, EN 61340-5-1 |
Cut resistance according to ISO 13997 | C |
Category | II |
Last viewed
Clamping pin/clamping sleeve ISO 13337 spring steel plain
Parking sensor tool set, master 34 pieces
Machine tap HSCo NeoTap blue through hole DIN 371/376
DUO-S impact drill bit with straight shank
Low-cut safety shoes, S1P
Joint mortar CERAfix® 505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
Starline Plus work dungarees
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and cross recess shape Z
Stud with head, shape B