Cutting disc Klingspor A 24 N Supra
Cutting disc for sst. A 24 N Supra Klingspor
CUTDSC-KLINGSPOR-13527-3,5X25,4MM-D350
Register now and access more than 125,000 products
The special formulation of the Kronenflex A 24 N Supra cutting discs protects them against clogging and soiling during use. They offer a good removal rate when machining stainless steel and aluminium.
With a hardness that has been optimised for their application, they offer a long service life with a high level of aggressiveness. They are suitable for use on hand-guided angle grinders.
Datasheets(X)
Diameter | 350 mm |
Thickness | 3.5 mm |
Drill hole | 25.4 mm |
Design | Straight |
Max. rotation speed | 5500 rpm |
Max. circumferential speed | 100 m/s |
Last viewed
Overlapping cover cap, for hexalobular socket and AW drive
Hexagon socket set screw with pin ISO 4028, steel, 45H, zinc-plated, blue passivated (A2K)
Round head screw with slot and nut W-0231, steel 4.8, zinc-plated with nut, slotted
Collated nails and gas cartridge NG CS-2/3
Ablative coating I
Double cylinder S5 locking system
ASME B18.8.1 steel zinc-plated yellow
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated
Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
Screw-on fastening base