Cutting disc Klingspor A 24 R Supra
Cutting disc for steel A 24 R Supra Klingspor
CUTDSC-KLINGSPOR-13536-3,5X32MM-D350
Register now and access more than 125,000 products
The combination of corundum grain and fibre-reinforced synthetic resin bonding used in the A 24 R Supra is ideally suited to the machining of steel. It is also the ideal choice for the machining of stainless steel and cast iron. The Kronenflex® cutting disc cuts steel with low wear and a long service life.
The disc of the Klingspor Supra performance class is ideal for maintenance and repair work, for fitter's shops, as well as for steel, plant and container construction. The Klingspor range includes the A 24 R Supra in disc thicknesses of between 2.0 and 3.5 mm, available in a range of disc diameters and in a curved or straight design. It is suitable for use with all commercially available angle grinders.
Datasheets(X)
Diameter | 350 mm |
Thickness | 3.5 mm |
Drill hole | 32 mm |
Design | Straight |
Max. rotation speed | 5500 rpm |
Max. circumferential speed | 100 m/s |
Last viewed
Oil drain plug repair kit 14 pieces
End piece For BR 80 wall duct
Hard hat Centurion HM S16EBFMR Enercon
Load securing tarpaulin with opaque fabric
Shoe accessories
A 505 Click door handle
Hexagonal bolt with shank and fine thread
WÜPOFAST® A2 chipboard screw A2 stainless steel, full thread, raised countersunk head, PZ
System case empty range 8.4.1 raster foam
Screw-in part, tapered sealing EN1254, red brass, 4380